Articles

sábado, 6 de octubre de 2012

Anti Gravity Lifters Technology

The Lifter works without moving parts, flies silently, uses only electrical energy and is able to lift its own weight plus an additional payload. 

The Lifter uses the Biefeld-Brown effect discovered by Thomas Townsend Brown in 1.928. 

The basic design of the Lifter has been fully described in the Townsend Brown US Patent N°2949550 filed on Aug 16, 1.960 and titled "Elektrokinetic Apparatus", you will find in this patent the full description of the main principle used in the Lifter devices.

Here are some pictures of the latest Anti Gravity Lifters to have been made.

Lifters are basically made out of aluminum foil or aluminum tape, some wire, lightweight Balsa wood strips. 

You will also need a high voltage source to power your lifter. 

You can easily get plans for building a lifter at this site, they also provide you with a high voltage generator to power your lifter.

Anti Gravity Propulsion, Lift, Thrust, and extremely fast speeds with Anti Gravity propulsion

What is Anti Gravity Propulsion? 

Well basically it is a method of propulsion which creates lift for an object. Usually to be considered anti gravity propulsion we usually look for a method of propulsion which is very powerful and that doesn't use gas, oil, or fossil fuels.

One of the best examples of anti gravity propulsion is Viktor Schauberger's inventions. Take for example The Repulsin.

The Repulsin creates 2 effects, here they are :

The Coanda Effect : a pure Aerodynamic effect based on the Bernoulli's principle.

The high speed vortex in the "vortex chamber" produces an electric, charged separation effect, called "the diamagnetic effect " by Schauberger. 

These two effects, combined, create the so-called "implosion effect".

What happens when The Repulsin is activated is that it is lifted up into the air with tremendous power. 

None of the power used in the Repulsin requires batteries, electricity, or fossil fuels or rocket boosters of any kind.

When the main electric engine is started, the Coanda effect begins to create a differential aerodynamic pressure between the outer and the inner surface of the primary hull. 

At a higher speed, the vortex chamber becomes a kind of high electrostatic generator due to the air particles, in high speed motion, acting as an electrical charge transporter. 

The Repulsine will begin to glow due to the strong ionization effect of the air. 

Now, we have all the ingredients for a continuous and strong Aether Flow along the main axis from the top to the bottom of the craft...

The radial air pressure required for lifting 1kg with the Coanda Effect is about 1,4 kg/cm2

Viktor knew the power of vortex's and how to use them to generate power. He ionized the air in the machine and this created lift. 

Here is a picture of a flying disc the American Army built using his technology. 


The Army stopped using his technology saying it was not worthy of being further tested. 

Why they said that nobody knows. 

As far as many people can see this was an amazing technology that should not have been abandoned.

Here is a picture of one of the crafts that was built by the Nazi's using his technology.


No hay comentarios:

Publicar un comentario